AMX Modero NXA-WAP200G Instruction Manual page 35

FIG. 23 Default WAP200G Status page
2. Click the Wireless tab, from the top row of the Configuration Utility to open the Basic
Wireless Configuration page (FIG. 24). The most important aspect to note when configuring
the WAP200G for unsecured (default) communication is the Country/Domain and the Wireless
transmission channel.
FIG. 24 Default WAP200G Wireless Configuration page
3. Leave the Enabled radio button selected. This allows the WAP200G to broadcast the SSID
name used to connect to the device and alert all wireless clients of its presence in the area.
4. Enter the desired SSID into the Wireless Network Name (SSID) field. The alpha-numeric string
is AMX by default but can be changed to any 32-character entry. This string must be
NXA-WAP200G Wireless Access Point
Wireless Device Communication Setup
Current WAP MAC Address
Current IP used by WAP
Wireless standard
Network Name (SSID)
Country & Frequency
29