Table of Contents
Advertisement
Chapter 4
4. 1.
Use Quick Setup Wizard
The Quick Setup Wizard will guide you to set up your router.
Tips:
If you need the IPv6 internet connection, please refer to the section of
Follow the steps below to set up your router.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Click
Quick Setup
to connect your router to the internet.
3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS,
and more.), log in with your TP-Link ID or click
the instructions to bind the cloud router to your TP-Link ID.
Note:
• To learn more about the TP-Link Cloud service, please refer to the
• If you do not want to register a TP-Link ID now, you may click
• If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process,
all your wireless devices must use the new SSID and password to connect to the router.
4. 2.
Quick Setup Via TP-Link Tether App
The Tether app runs on iOS and Android devices, such as smartphones and tablets.
1. Launch the Apple App Store or Google Play store and search
simply scan the QR code to download and install the app.
on the top of the page. Then follow the step-by-step instructions
OR
Set Up Internet Connection
Set Up an IPv6 Internet
Resigter Now
to get one. Then follow
TP-Link Cloud Service
Log In Later
to proceed.
Connection.
section.
"TP-Link
Tether" or
13
Advertisement
Table of Contents
