Bandwidth Control - TP-Link SafeStream TL-ER6020 User Manual

 Interface B ndwidth a
Interface:
Upstream
Bandwidth:
Downstream
Bandwidth:
Note:
● The Upstream/Downstream Bandwidth of WAN port you set must not be more than the bandwidth
provided by ISP. Otherwise the Traffic Control will be invalid.
● If there are data flowing into the Router from interface A and out from interface B while the
downstream bandwidth of A is different from the upstream bandwidth of B, then the smaller one
should be considered as the effective bandwidth, and vice versa.
● Click the <View IP Traffic Statistics> button to jump to IP Traffic Statistics page.
3.3.2.2

Bandwidth Control

On this page, you can configure the Bandwidth Control function.
Choose the menu Advanced→Traffic Control→Bandwidth Control to load the following page.
The following items are displaye
Displays the current enabled WAN port(s). The To
the sum of bandwidth of the enabled WAN ports.
Displays the bandwidth of each WAN port for transmitting data. The
Upstream Bandwidth of WAN port can be configured on WAN page.
Displays the bandwidth of each WAN port for receiving data. Th
Downstream Bandwidth of WAN port can be configured on WAN page.
Figure 3-36 Bandwidth Control
d on this screen:
-56-
tal bandwidth is equal to
e