TP-Link SafeStream TL-ER6020 User Manual page 167

Glossary
MAC address（Media
Access Control address）
M
MTU（Maximum
Transmission Unit）
NAT（Network Address
Translator）
N
NTP Server
POP3（Post Office Protocol
3）
P
PPPoE（Point-to-Point
Protocol over Ethernet）
SMTP（Simple Mail
Transfer Protocol）
SSH（Secure Shell
Protocol）
S
SA （Security Association）
TCP（Transfer Control
Protocol）
TCP/IP（Transmission
T
Control Protocol/ Internet
Protocol）
Description
Standardized data link layer address that is required for every
port or device that connects to a LAN. Other devices in the
network use these addresses to locate specific ports in the
network and to create and update routing tables and data
structures. MAC addresses are 6 bytes long and are controlled
by the IEEE.
The size in bytes of the largest packet that can be transmitted.
Mechanism for reducing the need for globally unique IP
addresses. NAT allows an organization with addresses that are
not globally unique to connect to the Internet by translating
those addresses into globally routable address space.
NTP Server is used for synchronising the time across computer
networks.
POP3 is intended to permit a workstation to dynamically access
a maildrop on a server host in a useful fashion.
PPPoE is a network protocol for encapsulating Point-to-Point
Protocol (PPP) frames inside Ethernet frames.
SMTP is an Internet standard for electronic mail (e-mail)
transmission
SSH is a network protocol that allows data to be exchanged
using a secure channel between two networked devices.
SA is the establishment of shared security attributes between
two network entities to support secure communication.
Connection-oriented transport layer protocol that provides
reliable full-duplex data transmission.
Common name for the suite of protocols to support the
construction of worldwide Internet works. TCP and IP are the
two best-known protocols in the suite.
-162-