TP-Link SafeStream TL-ER6020 User Manual page 144

2) Interface Bandwidth
Choose the menu Network→WAN→WAN1 to load the configuration page. Configure the Upstream
Bandwidth and Downstream Bandwidth of the interface as Figure 4-13 shows. The entered
bandwidth value should be consistent with the actual bandwidth value.
3) Bandwidth Control Rule
Choose the menu Advanced→Traffic Control→Bandwidth Control to load the configuration page.
Then continue with the following settings:
Settings:
Direction:
Group:
Mode:
Guaranteed Bandwidth (Up/Down):
Limited Bandwidth (Up/Down):
Effective Time:
Status:
Click the <Add> button to apply.
Figure 4-12 Bandwidth Setup
LAN -> WAN1
group1
Individual
100
800
Keep the default value
Activate
-139-