TP-Link SafeStream TL-ER6020 User Manual page 30

Account Name:
Password:
Server IP:
MTU:
Active Mode:
Secondary
Connection:
Connection Type:
IP Address:
Subnet Mask:
Default Gateway:
<Disconnect> to disconnect the Internet connection and release the
current IP address.
Enter the Account Name provided by your ISP. If you are not clear,
please consult your ISP.
Enter the Password provided by your ISP.
Enter the Server IP provided by your ISP.
MTU (Maximum Transmission Unit) is the maximum data unit
transmitted by the physical network. It can be set in the range of
576-1460. The default MTU is 1460. It is recommended to keep the
default value if no other MTU value is provided by your ISP.
You can select the proper Active mode according to your need.
Manual: Select this option to manually activate or terminate the

Internet connection by the <Connect> or <Disconnect> button.
It's optimum for the dial-up connection charged on time.
Always-on: Select this option to keep the connection always on.

The connection can be re-established automatically when it is
down.
Here allows you to configure the secondary connection. Dynamic IP
and Static IP connection types are provided.
Select the secondary connection type. Options include Disable,
Dynamic IP and Static IP.
If Static IP is selected, configure the IP address of WAN port. If
Dynamic IP is selected, the IP address of WAN port obtained is
displayed.
If Static IP is selected, configure the subnet mask of WAN port. If
Dynamic IP is select, the subnet mask of WAN port obtained is
displayed.
If Static IP is selected, configure the default gateway. If Dynamic IP is
selected, the obtained default gateway is displayed.
-25-