Arp Scanning - TP-Link SafeStream TL-ER6020 User Manual

You can view the information of the entries and edit them by the Action buttons.
The first entry in Figure 3-46 indicates: The IP address of 192.168.1.101 and MAC address of
00-19-66-83-53-CF have been bound and this entry is activated.
Note:
If all the entries in the binding list are disabled and "Permit the packets of IP-MAC Binding entries only"
option is selected and saved, the WEB management page of the Router cannot be login. At the
moment, you should restore the Router to factory default and login again.
3.4.1.2

ARP Scanning

ARP Scanning feature enables the Router to scan the IP address and corresponding MAC address
and display them on the List of Scanning Result.
Choose the menu Firewall→Anti ARP Spoofing→ARP Scanning to load the following page.
Enter the start and the end IP addresses into the Scanning IP Range field. Then click the <Scan>
button, the Router will scan all the active hosts within the scanning range and display the result in the
list.
The entries displayed on the List of Scanning Result do not mean the IP and MAC addresses are
already bound. The current status for the entry will display in the "Status" field.
--- Indicates that the IP and MAC address of this entry are not bound and may be
replaced by error ARP information.
Indicates that this entry is imported to the list on IP-MAC Binding page, but not
effective yet.
Figure 3-47 ARP Scanning
-71-