Canceling Image Processing; Moving The Center Of The Ppi Screen; Setting The Position To Which The Center Is Relocated - JRC JMA-2343 Instruction Manual

PR2: This function is used in stabilizing unstable images using PR1.
This function is effective when sea surface clutter is abundant.
As a rule of thumb, the function should be used at ranges of 3NM or more.
Canceling image processing g g g Canceling image processin
Canceling image processin Canceling image processin
(a) Select "OFF" in the line "PROCESS" - the menu "FUNCTION".
The image processing function has been canceled.

3.3.22 Moving the center of the PPI screen

By moving the center of the PPI screen (relocating the center), it is possible to extend
the range in any given direction.
This function is disabled when the zoom function is enabled or the maximum Range
is in use.

Setting the position to which the center is relocated.

Setting the position to which the center is relocated. Setting the position to which the center is relocated. Setting the position to which the center is relocated.
(a) Push the soft key ＤＩＳＰＬＡＹ
(b) Push the soft key 2 and select first ＯＦＦ
The marker will be displayed on PPI screen.
(c) Use the cross key to position the marker at the center of the desired PPI screen.
The marker may be moved up to within 66% of the monitoring range.
(d) Push the ＥＮＴＥＲ
The center of the PPI screen will move to the designated location.
ＤＩＳＰＬＡＹ
ＤＩＳＰＬＡＹ ＤＩＳＰＬＡＹ
key.
ＥＮＴＥＲ
ＥＮＴＥＲ ＥＮＴＥＲ
.
ＣＥＮＴ and then ＣＥＮＴＥＲ
ＯＦＦ ＣＥＮＴ ＯＦＦ ＯＦＦ ＣＥＮＴ ＣＥＮＴ
191
ＣＥＮＴＥＲ .
ＣＥＮＴＥＲ ＣＥＮＴＥＲ