Canceling Unwanted Targets - JRC JMA-5204 Instruction Manual

5.2.2 Canceling Unwanted Targets

Unwanted targets can be canceled one by one in the following cases:
Tracking is no longer necessary for targets with which vectors/symbols are displayed after being acquired
and tracked.
The number of vectors on the radar display needs to be reduced for easy observation.
When targets are to be re-acquired from the beginning, all the current vectors can also be canceled.
Canceling targets one by one
Procedure 1
2
Alternative 1
2
Canceling all targets collectively
Procedure 1
Note: When all the targets have been canceled, the system stops tracking them. Thus, you need to re-acquire
targets in manual or automatic acquisition mode. Do not cancel all the targets unless otherwise
required.
Move the cross cursor mark onto the target to be canceled.
Press the [TGT CNCL] key.
The target's vectors and symbols will disappear, and only the radar video remains.
Press the CURSOR button at the upper right of the radar display
several times until
The TT acquisition mode is set as the cursor mode.
Move the cross cursor mark onto the target to be acquired, and press the
[CLR/INFO] key.
The target's vectors and symbols will disappear, and only the radar video remains.
Hold down the [TGT CNCL] key.
The vectors and symbols of all the targets will disappear, and only the radar videos
remain.
ACQ TT appears.
21