Deleting - Ricoh FAX 3320L Basic Features

J
Press the {Clear/Stop} key, and then
reenter the destination name.
Note
❒ Under rare circumstances, gar-
bled characters may appear
during name registration if you
use the {Pause/Redial} key to
display the fax number of par-
ties located in other countries. If
this happens, simply delete the
garbled characters using 0 or
1 and the {Clear/Stop} keys,
and then go on to enter the
name.
K
Press the {OK} key.
The name is programmed.
L
Press 0 or 1 to select "On" or
"Off".
Note
❒ Label insertion allows the re-
c e i v e r ' s n a m e t h a t i s p r o -
grammed in Quick Dial or
Speed Dial to be printed on the
fax when it is received at the
other end. See p.8 "Label Inser-
tion", Advanced Features.
M
Press the {OK} key.
If you want to store another Quick
Dial, go to step E.
N
Press the {User Tools} key to re-
turn to standby display.

Deleting

The following procedure describes
how to delete fax numbers registered
in Quick Dial keys.
Limitation
❒ When a Quick Dial key is being
used for a standby Memory Trans-
mission, the message "
is in Use. Cannot Delete.
shown and you cannot delete the
destination for this key.
A
Press the {User Tools} key.
B
Press 0 or 1 until " 2. Fax Fea-
tures " is displayed.
C
Press the {OK} key.
Confirm that " 1. Program / Delete
" is displayed.
D
Press the {OK} key.
Quick Dial
This Dial
" is
3
51