Diagnostic Error Message Tables - IBM INTELLISTATION E PRO 6204 User Manual

4. Run the appropriate diagnostics program and when the Diagnostic Programs
5. Select View Test Log from the list that appears; then follow the instructions on
6. Save the test log to a file on a diskette or to your hard disk.

Diagnostic error message tables

The following tables provide descriptions of the error messages that might be listed in
the test log after you run the diagnostic programs.
Table 11. Diagnostic error messages.
135
162
164
166
167
175
176
179
screen appears, select Utility.
the screen.
Note: The system maintains the test-log data while the system is turned on.
When you turn off the power to the computer, the test log is cleared.
Important
If diagnostic error messages are displayed that are not listed in the following
table, make sure that your computer has the latest levels of BIOS code and
diagnostics installed.
Code Text message
Fan failure
Configuration error —
default configuration
used.
Memory size error
Boot Block Checksum
Error
No Process BIOS Update
Found
Primary Copy of Secure
Data is Damaged.
The System has been
tampered with
Boot Integrity Services
Segment Error
Detection
An expected fan is not
present or is not rotating.
CMOS has a bad
checksum and/or CRC.
System RAM size is less
than expected.
The Boot Block Recovery
segment of the Flash part
has a bad checksum.
No microcode update
image exists for the
current microprocessor.
Refer to "Security" on
page 29.
The BIS area checksum
is invalid.
Chapter 6. Solving problems
Action
Accept the new fan
configuration in Setup.
If the problem persists,
call for service.
Reload default settings.
Ensure that the DIMM is
properly seated.
1. Reseat the failing
DIMM.
2. If the problem
remains, replace the
DIMM.
If the problem persists,
call for service.
If your computer does not
have the latest level BIOS
code installed, update the
BIOS code to the latest
level.
Refer to "Security" on
page 29.
If your computer does not
have the latest level BIOS
code installed, update the
BIOS code to the latest
level.
89