IBM INTELLISTATION E PRO 6204 User Manual page 51

• Legacy OS wake up support
Select this choice to enable or disable a non-Windows operating system to use
the adapter remote wake up capability. The default setting is Disabled.
Notes:
1. Use the default setting for Advanced Configuration and Power Interface
(ACPI) aware operating systems, such as Windows 2000 and Windows XP.
2. If your computer is running a non-ACPI operating system, you must set this
selection to enable it to use the Wake-on-LAN support.
3. When using a non-ACPI operating system, do not send a wake up packet to
the computer while it is turned on. If a wake up packet has been sent while
the computer is on, you might be unable to turn the computer off. See
"Troubleshooting charts" on page 92 for more information.
Chapter 4. Configuring your computer
35