Principal Parts - Bernina Bernette 56 Instruction Manual

•
• •
PRINCIPAl PARTS
• (j) Bobbin winding assembly
• Winds the thread onto the bobbin to be used for the lower thread .
•
• ®Spool pin
• Holds the spool of thread .
•
• ®
Bobbin winding tension disc and thread guide
@ Thread take-up lever
•
•
•
• •
•
•
• •
• •
•
•
• •
•
• •
•
•
•
• •
•
•
®
Thread cutter
®
Needle threader (75 only)
IJ) Drop feed lever
®
Upper tension control dial
Controls the tension of the upper thread.
®
Stitch width dial (60, 70 and 75 only)
Controls the stitch width.
(@ Pattern selection dial
Turn in either direction to select the desired stitch.
@ Stitch length dial
Controls the length of the stitches.
@ Reverse sewing lever
Push for stitching in the reverse direction .
@ Buttonhole fine-adjustment screw
@ Buttonhole lever (70 and 75 only)
@ Needle cushion
@Handle
®
Balance wheel
Turn toward you (counterclockwise) to raise and lower the needle.
(@·Main power/sewing light switch
Turns the main power and sewing light on and off.
(@ Foot controller receptacle
Insert the foot controller plug for operation.
®
Presser foot lever (2-step I A: second step)
Raises and lowers the presser foot.
@ Foot controller
Used to control sewing speed start and stop .
.,