Konica Minolta SL1000 Digital Film Scanner User Manual page 89

When the 16/35mm Roll Film(Open-Reel) is used.
16/35mm Roll Film (open-reel) can be used with the A type cartridge adaptor installed.
1
Mount the 16mm or 35mm Film (Open-Reel) onto the Reel Shaft in the figure below and
unwind the Leading Edge of the Film.
2
Insert the film between the upper and lower fiche glass.
NOTE ! Set the film as shown in the figure below.
・ Do not set it in a counterclockwise rolling so that the film surface might get the wound.
3
Insert the Leading Edge of the Film into the slit in the take-up reel and rotate the take-up
reel two to three turns so that the Film Leader is wound around the take-up reel.
4
Operate the Fiche Carrier, and rewind the film to an image lead position.
CAUTION
Chapter 4 Operation
4-17