Konica Minolta SL1000 Digital Film Scanner User Manual page 58

SL1000 User's Guide
15. Move Up
16. Move Down
17. Reset
18. Show Text of Icons
19. Show Output Setting
Button
20. Auto Correction
21. Show Property
22. Launch Film
Selection at Startup
23. Use operation sound
24. The setting is
preserved and
complete.
3-32
The position of the selection button on the toolbar is moved (on the
left).
When the button is selected on the "Toolbar", and "Move Up" is
clicked, it shifts up one.
The position of the selection button in the toolbar is moved on (lower
right).
When the button is selected on the "Toolbar", and "Move Down" is
clicked, it shifts down by one.
The button displayed in the toolbar is reset in the initial values.
The toolbar functions are displayed under the toolbar.
"Output setting" button of the toolbar is displayed.
The adjusting item executed when the "Auto Corrections" button is
clicked, is set.
It can be selected according to the following.
1. Exposure & Deskew & Focus
2. Exposure & Deskew
3. Deskew & Focus
4. Exposure & Focus
Various properties are displayed at the right of the scan window by the
sidebar.
SCAN Mode
When the application is started, the "Film Selection" screen is
displayed.
When the application starts, and the operation is executed, the sound is
reproduced.
When Windows Media Player is not installed, the
NOTE !

operation sound is not reproduced.
The last settings are preserved when quitting the application and it
ends.
The setting of each logon user of Windows is
NOTE !

preserved.
VIEW Mode