4. Contrast
5. Sharpness
NOTE !
Even if "Brightness" and "Contrast" are adjusted according to the film, an
appropriate image density might not be obtained. In that case, it might be
improved by changing illuminance intensity of the LED lamp. (Please refer to the
section "3.4 Lamp Illuminance".)
The contrast of the image is adjusted.
High
Low
The proper image density can be obtained by adjusting
NOTE !
"Brightness" and "Contrast" to distribute the histogram in the
whole area.
The sharpness of the image is adjusted.
Sharp
Soft
Chapter 3 SL-Touch for SL1000
The contrast of the image is increased.
The contrast of the image is decreased.
The image is made sharper.
The image is made softer.
3-23