Konica Minolta SL1000 Digital Film Scanner User Manual page 57

3. Ask Before Output
4. White Balance
5. Color Correction
6. ICC Profile
7. Auto Contrast
8. Digital GEM
9. Put the Scanner to
Sleep
10. Turn OFF the
Scanner
11. Non-display button
12. Toolbar
13. Add
14. Remove
It displays on the confirmation screen before the scan image is output
when "The scan image is displayed" is "ON".
For Scan to File
The correction of the white balance is set.
There are two selections available (Manual, Auto).
The correction of the color reproduction for the color image is set.
There are three selections available (Non, Standard, Color
Management).
The ICC Profile is selected.
When the monochrome film is set, the image contrast is automatically
corrected.
The graininess of the film is decreased.
It is effective for the image quality reproduction of negative film.
The time that should elapse when no operation is performed before the
device enters Sleep Mode.
It can be selected according to 7 selections (5 Minutes, 15 Minutes, 30
Minutes, 60 Minutes, 2 Hours, 3 Hours, 4 Hours).
The time that should elapse when no operation is performed in Sleep
Mode before the Power Supply is turned OFF.
It can be selected according to 4 selections (60 Minutes, 2 Hours, 3
Hours, 4 Hours).
The buttons not displayed on the toolbar is displayed in the list.
The button displayed on the toolbar is displayed in the list.
The list is displayed, queuing up in order from the left of the toolbar to
the lower right.
The button displayed on the toolbar is added.
"Non-display button" is selected, and "Addition" is clicked, and the
oriented button is added onto the "Toolbar" list.
The button displayed on the toolbar is deleted.
The oriented button on the "Toolbar" is selected, and the button is
deleted when "Remove" is clicked.
Chapter 3 SL-Touch for SL1000
Scan to Print
3-31