Konica Minolta SL1000 Digital Film Scanner User Manual page 6

SAFETY INFORMATION
● Do not place any objects around the power plug as the power plug may be difficult to
pull out when an emergency occurs.
● The socket-outlet shall be installed near the machine and shall be easily accessible as
the power plug may be difficult to pull out when an emergency occurs.
● Always use this product in a well ventilated location. Operating the product in a
poorly ventilated room for an extended period of time could injure your health.
Ventilate the room at regular intervals.
● Whenever moving this product, be sure to disconnect the power cord and other cables.
Failure to do this could damage the cord or cable, resulting in a fire, electrical shock,
or breakdown.
● When moving this product, always hold it by the locations specified in the User's
Guide or other documents. If the unit falls it may cause severe personal injury. The
product may also be damaged or malfunction.
● Remove the power plug from the outlet more than one time a year and clean the area
between the plug terminals. Dust that accumulates between the plug terminals may
cause a fire.
● When unplugging the power cord, be sure to hold onto the plug. Pulling on the power
cord could damage the cord, resulting in a fire or electrical shock.
Precautions for Routine Use
● Do not use this product in an area where ammonia or other gases or chemicals are
present. Failure to do so may shorten the service life of the product, cause damage or
decrease performance.
● Do not use this product in an environment with a temperature outside the range
specified in the User's Guide, as a breakdown or malfunction could result.
CAUTION
iv