Replacing The Separation Roller Or Separation Roller Tires - Kodak i5000 series User Manual

Replacing the separation
roller or separation roller
tires
5-12
1. Open the scanner cover.
2. Pull the separation roller cover forward and remove the separation roller.
NOTE: The separation roller cover is spring-loaded. Hold the separation
roller cover back until you remove the separation roller, then
gently lower the separation roller cover back in place.
If you want to replace the separation module, do Steps 3 and 4. If you want
to replace the separation roller tires, go to Step 5.
3. Insert the new separation roller. Be sure to line up the slots on the
separation roller with the holders.
4. Gently release the separation roller cover back in place and close the
scanner cover.
A-61670 December 2010