Setting Or Changing A Password - Kodak ScanMate i1150WN User Manual

Setting or changing a
password
2-10
When you are logged in, the Support tab provides an option for creating
a password.
1. Click Change Admin Password on the Support tab to display the
Change Admin Password dialog box.
2. Enter the previous password in the Old password field. If there is no
previous password, this field will be blank.
3. Enter the new password in the Admin password field.
4. Re-enter the new password in the Confirm password field.
5. Click Apply Password Change. Once the password is established,
only the Support, Status and About tabs will be visible and the
Update Scanner Firmware and Change Admin Password
buttons will not be displayed to anyone who does not know the
password.
NOTE: Click Exit to leave this dialog box without applying any changes.
The password option using the EasySetup Configuration page allows
you to create an EasySetup Configuration page that allows you to limit
changes to a configuration to authorized personnel only. This option is
described in the section entitled, "Using the special EasySetup
Configuration page" later in this chapter.
A-61854 April 2016