Fujitsu fi-5950 Operator's Manual page 45

3. Move your hands away from the stacker slowly.
⇒ The stacker will be fixed in a position tilting forward.
HINT
ATTENTION
<Switching back to the horizontal setting
1. Slide the stacker out towards you.
2. Push down the inner part of the stacker.
⇒ The stacker goes back into its horizontal position.
• When set to "Bottom edge" position, the stacker does not move up or down
and becomes immovable even during scanning operation.
• In this position, the stacker's maximum load will be 200 sheets.
• If the pages do not stack well, use the Document Smoother.
the Document smoother" on page
When you align the documents from the leading edge (by tilting forward
setting of stacker), the documents must meet the following conditions:
(
Length
27)
) ÷ ( ) <
Width 1.5
2.7 Setting up the Stacker
("2.8 Using
2
25