Fujitsu fi-5950 Operator's Manual page 181

• Carbonless paper contains chemical substances that may damage the
ATTENTION
Pad or rollers (e.g. Pick roller) when documents are fed. Pay attention to
the following:
Cleaning:
If pick errors occur frequently, clean the Pad and the Pick roller. For
details on cleaning the Pad and the Pick roller, refer to
CARE" on page
Replacing parts:
The service life of the Pad and Pick roller may be shortened com-
pared to the case of scanning wood containing paper documents.
• If paper containing wood is scanned, the service life of the Pad and Pick
roller may become shorter than that of the Pad and Pick roller used for
scanning only woodfree paper.
• The pad or rollers of the scanner could be damaged if photographs or
sheets of paper attached to the scanned document have contact with
the pad or rollers during scanning.
• Scanning documents of calendered paper such as photographs may
damage the surface of them.
When using the ADF, the leading edge of all document sheets must be
evenly aligned. Make sure that curling at the leading edge is within the fol-
HINT
lowing tolerances:
103.
More than 30mm
Less than
3mm
Top of the paper
More than 30mm
Less than
5mm
Top of the paper
"4 DAILY
Feed direction
Read surface
Feed direction
Read surface
7.2 Document Quality
7
161