Fujitsu fi-5950 Operator's Manual page 128

5. Set the side guide of the hopper to B4 width.
For details, refer to
6. Pull out the stacker extension and adjust it to the length of the cleaning
sheet.
For details, refer to
7. Remove the protective paper from the cleaning sheet.
8. Place the same cleaning sheet with the adhesive side facing up on the
hopper table, aligning its left side with the side guide, as shown in the
illustration below.
9. Press the [Scan] button
installed.)
⇒ The function number display will change as shown below and the cleaning sheet will be
fed and ejected into the stacker.
108
4.3 Cleaning the Rollers (using the cleaning sheet)
"2.6 Loading Documents on the Hopper" on page
"2.7 Setting up the Stacker" on page
Scan
2 times (3 times, if Imprinter option is
17.
22.