Fujitsu fi-5950 Operator's Manual page 168

Is the Pad or the Brake roller worn
out?
Have you set the document thickness
on the operator panel? on
If the problem can not be resolved with this flowchart, refer to "6.4
Before Contacting a Service Provider."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.
(*1) Refer to "7.2 Document Quality" on page
(*2) Refer to
"7.5 Multifeed Detection Conditions" on page
(*3) Refer to
"3.7 Detecting Multifeeds" on page
(*4) Refer to
"2.6 Loading Documents on the Hopper" on page
(*5) Refer to "4 DAILY CARE" on page
(*6) Refer to "5 REPLACEMENT OF CONSUMABLES" on page
(*7) Refer to "2.9 Setting the Paper Thickness" on page
148
6.3 Troubleshooting
continued from the previous page
YES
NO
NO
YES
159.
82.
103.
Replace the worn out Pad or
Brake roller. (*6)
Set the document thickness
to a thicker value (*7)
164.
17.
119.
29.