Fujitsu fi-5950 Operator's Manual page 152

4. Remove the Brake roller
Lift up the left side of the Brake roller and remove the left shaft. Then pull the right shaft out of
its hole to remove it.
5. Install the new Brake roller.
After inserting the right end of the shaft into the hole, attach the left end.
6. Close the Pad cover.
7. Close the ADF cover.
Refer to "2.3 Opening and Closing ADF" on page
8. Reset the Brake roller counter.
Refer to "5.2 How to check and reset the Consumable/Cleaning Counter" on page
132
5.6 Replacing the Brake Roller
Brake roller
Brake roller
12.
121.