Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fujitsu fi-590PRB
Summary of Contents for Fujitsu fi-590PRB
-
Page 2: Table Of Contents
Contents Introduction ..............................1 1. Preparations ............................5 1.1 Names of Component Parts .......................... 5 2. Basic Operations ............................ 6 2.1 Installing the Print Cartridge ........................6 2.2 Operating Test ............................... 7 2.3 Positioning the Print Cartridge ........................8 2.4 How to Use the Paper Guides ........................ -
Page 3: Introduction
Introduction Thank you for purchasing the fi-590PRB Imprinter option ® Windows Vista Home Basic Windows Windows for fi-5900C/fi-5950 Color Image Scanner. (32/64-bit) Vista (*1) ® Windows Vista Home Premium This guide explains how to install and use the imprinter. (32/64-bit) (For further details about the functions and operations of ®... -
Page 4: Canadian Doc Regulations
Bescheinigung des Herstellers / information first before proceeding. Importeurs This symbol alerts the operator to useful advice on HINT Für den fi-590PRB wid folgendes bescheinigt: operating the device. • In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört The triangle indicates that special care and •... - Page 5 AC outlet. the power cable from the AC outlet, and all other Then, contact your FUJITSU scanner dealer or an interface cables. Make sure that the floor is free of authorized FUJITSU scanner service provider. Pay any obstructions.
- Page 6 ● The power cable does not have any cracks or scratches. If any abnormality is detected, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Make sure to ground to avoid electric shock. Be sure to ground before plugging into the AC outlet.
-
Page 7: Preparations
1. Preparations 1.1 Names of Component Parts Open the Top cover of the scanner (fi-5900C/fi-5950) and you can see the Imprinter (fi-590PRB) installed in the front side. Top cover Print cartridge holder fi-590PRB Imprinter Operator’s Guide | 5... -
Page 8: Basic Operations
2. Basic Operations 2.1 Installing the Print Cartridge Open the print cartridge holder, rotating the lever to the left. Mount the print cartridge as follows: When installing or replacing the print cartridge, be ATTENTION careful not to insert it out of place. Confirm that the scanner is turned off. -
Page 9: Operating Test
ATTENTION smaller than A4 or Letter, printing may not successfully complete. ● Confirm that the Print Cartridge is positioned within the document width. For the details, please refer to “2.3 Positioning the Print Cartridge”. fi-590PRB Imprinter Operator’s Guide | 7... -
Page 10: Positioning The Print Cartridge
Close the top cover and press lightly until it is 2.3 Positioning the Print Cartridge fixed with the tabs. To Position the print cartridge for printing: Press the tabs on the left and right sides of the top cover, and lift to open the top cover. Top cover 2.4 How to Use the Paper Guides Place the print alignment mark to the position... -
Page 11: Print Setup
The following options can be selected on the [Imprinter (Endorser)] tab. When either the Pre-Imprinter or the Post-Imprinter is installed: ● [Enable] ● [Disable] When both the Pre-Imprinter and the Post-Imprinter are installed: ● [Disable] ● [Pre-Imprinter] ● [Post-Imprinter] fi-590PRB Imprinter Operator’s Guide | 9... -
Page 12: Replacing The Print Cartridge
Take out the Print cartridge from the holder. 2.6 Replacing the Print Cartridge Take the new Print Cartridge out of its pouch and detach the protection tape from the Print Make sure that you turn off the scanner power and unplug the power cable from the Cartridge. - Page 13 If the [Software Operation Panel] is password protected, enter the password to cancel the View Only mode. (fi-5950 only) Click the [Clear] button at the [Remaining Ink (Post)] button. The Ink remain counter will reset to 100%. fi-590PRB Imprinter Operator’s Guide | 11...
-
Page 14: Daily Care
3. Daily Care 3.1 Cleaning the Print Cartridge 3.2 Cleaning the Imprinter Poor quality prints can occur due to blocked ink emission Ink may spatter the vicinity of the print cartridge holder. holes in the nozzle. Leaving the imprinter unused for long periods can also cause emission holes to become blocked. - Page 15 Back of the unit Imprinter head Hold the ADF cover with both hands and press it down slowly. Press the ADF cover until it is fixed. fi-590PRB Imprinter Operator’s Guide | 13...
-
Page 16: Error Messages
Description: The imprinter fuse has blown out. How to solve: Contact the store where you purchased the scanner, or contact an authorized FUJITSU scanner service provider. For other errors, refer to “fi-5900C Image Scanner ATTENTION Operator’s Guide” or “fi-5950 Image Scanner Operator’s Guide”... -
Page 17: Specifications
ATTENTION coated paper, and art paper take longer time for the ink to dry and may cause poor print quality. The imprinter must be cleaned more frequently if you use these types of papers. fi-590PRB Imprinter Operator’s Guide | 15... - Page 18 Item Specification Printing area Reference Head movable range Point Unit: mm * The document stains with ink when printing in the shaded areas (shown in the illustration). Therefore, correct printing operations in such areas are not guaranteed. Vertical: ±4mm (at reference position) Character position accuracy Horizontal: ±4mm (at reference position)