Do-It-Yourself Maintenance - Thermador PRD486JDGU Use And Care Manual

Pro grand dual fuel ranges prd36 and prd48 series
Hide thumbs Also See for PRD486JDGU:
Table of Contents

Advertisement

Available languages

Available languages

Do-It-Yourself Maintenance

Oven Light Bulb Replacement
CAUTION:
Before replacing the light bulb, be certain the
Oven Light Switch is in the off position. Let bulb
and cover cool completely before touching. If the
light bulb glass comes loose from the base, turn
the power to the oven OFF at the circuit breaker
panel before attempting to remove the bulb base
from the socket.
Replace only with a recommended light bulb designed for
appliance oven use. DO NOT USE a standard household
light bulb in any oven. Call THERMADOR
Center at 1-800-735-4328 or your nearest THERMADOR
dealer to determine the proper replacement bulb for your
range. You will need to know your range's model number
and serial number.
To Replace the Light Bulb:
Use only 10 Watt, 12 Volt bi-pin halogen light bulbs. Use a
clean, dry cloth to handle halogen light bulbs. This will
increase the life of the bulb.
Figure 33: Oven Lamp Assembly
1. Turn off circuit breaker.
2. Remove oven racks.
3. Slide the tip of a flat blade screw driver between the
®
Customer Care
4. Support the glass lens cover with two fingers along the
®
5. Gently twist the flat blade screw driver to loosen the
6. Remove the glass lens cover and fixing clip.
7. Remove the bulb by grasping and sliding the bulb
8. Do not touch the glass of the new replacement bulb
9. Press down to seat the bulb.
10. Slide the protective lens into the holder clip and push
11. Turn on circuit breaker.
fixing clip and the lamp housing (Figure 33 and 34.)
Figure 34: Opening Location
bottom edge to prevent the cover from falling to the
bottom of the oven.
glass lens cover.
straight back until the two prongs have cleared the
ceramic holder.
with your fingers. It will cause the bulb to fail when it
first lights. Grasp the replacement bulb with a clean dry
cloth. Locate the two prongs in the ceramic holder,
gently poking until the two prongs locate in the ceramic
socket.
the other end until the fixing clip snaps back into the
housing.
English 39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents