Using The Cooktop - Thermador PRD486JDGU Use And Care Manual

Using The Cooktop

Sealed Star ® Burners
Figure 8: Star
The cooktop features four or six gas surface Star
®
the right-front Star Burner is rated at 22,000 BTU/HR
(18,000 BTU/HR using Propane) and all other Star
burners are rated at 18,000 BTU/HR (15,000 BTU/ HR
using Propane).
Each burner has a unique QuickClean
which allows the burner and area around the burner to be
easier to clean.
On all models, the two left and two right burners have the
®
exclusive ExtraLow feature, any remaining burners are
®
Standard. Each Star Burner has its own control knob.
Control Knobs
Typically, a pair of control knobs is located on the control
panel, directly in front of the pair of gas Star
control — with one gas Star
the other on the rangetop.
English 12
®
Brass Burner Base
®
burners;
®
TM
Base feature
®
burners they
®
Burner positioned in front of
Figure 9: Standard Star
The symbol near each burner control knob identifies the
burner position on the range cooktop. The symbols shown
in Figure 10 are indicative of 48" range models.
Left Rear
XLO
Center Rear
Center Front
XLO
Left Front
Operation of the Burners
• Press in on the knob and turn it counter-clockwise to
the setting.
• The igniter for the selected burner sparks to ignite the
burner.
• After flame ignition, the igniter stops sparking.
• Rotate the knob to any flame setting between HI and
SIM.
• A blue light is positioned directly above each burner
control knob. The light turns on when the control knob
is rotated to an active mode. It is off when the control
knob is in the OFF position.
®
Burner Control Knob
Right Rear
XLO
Griddle
XLO
XHI
Right Front
Figure 10: Cooktop Symbols