Using The Cooktop; Surface Burners - Thermador PRG364JDG Use & Care Manual

Using the Cooktop

Surface Burners

Using the Sealed STAR
Each burner has a unique QuickClean
allows the burner and area around the burner to be easier
to clean.
On all models, the two left and two right burners have the
®
exclusive ExtraLow feature, any remaining burners are
Standard. Each burner has its own control knob.
ExtraLow ExtraLow ExtraLow Standard Standard Standard
ExtraLow ExtraLow ExtraLow Standard Standard Standard
English 12
Burners
®
Star ®
Figure 6: STAR Brass Burner Base
®
base feature which
ExtraLow ExtraLow ExtraLow
ExtraLow ExtraLow ExtraLow
& & &
ExtraHigh ExtraHigh ExtraHigh
Figure 7: Burner Power Features
Control Knobs
Typically, a pair of control knobs is located on the control
panel directly in front of the pair of gas STAR burners they
control — with one gas STAR burner positioned in front of
the other on the rangetop.
The symbol near each burner control knob identifies the
burner position on the range cooktop. The symbols shown
in Figure 8 are indicative of 48" range models.
Left Rear Center Rear
Left Front Center Front
Operation of the STAR Burners
1. Press in on the knob and turn it counter-clockwise to
the HI setting.
• The igniter for the selected burner sparks to ignite
the burner.
• After flame ignition, the igniter stops sparking.
2. Rotate the knob to any flame setting between HI and
SIM.
• A blue light is positioned directly above each
burner control knob. The light turns on when the
control knob is rotated to an active mode. It is off
when the control knob is in the OFF position.
Right Rear Grill Rear Griddle
Right Front Grill Front
Figure 8: Cooktop Symbols