Clearing Jams - Central Pneumatic 92917 Set Up And Operating Instructions Manual

Clearing jams

FROm ACCIdENTAL
OPERATION, BEFORE ANY
mAINTENANCE OR REPAIRS
ARE dONE (including clearing
jams):
• Wear ANSI-approved safety
goggles with side shields.
Other people in the work area
must also wear ANSI-approved
impact safety goggles with side
shields.
• Release the trigger.
• detach the air supply.
• Attempt to fire the Tool into
a piece of scrap wood to
ensure that it is disconnected
and is incapable of firing any
fasteners.
• Empty the canister and leave
it open during service.
1. Press down on the Pin (91) and
swing the Door (53) open.
2. If a fastener is jammed in the
discharge area, remove it with pliers.
3. If you are unable to clear the fastener
jam using the method prescribed
above, the tool should be taken to a
qualified service technician for proper
servicing.
Page 16 For technical questions, please call 1-800-444-3353.
TO PREVENT
SERIOuS INjuRY
SKU 92917
93253