Harbor freight air mini hand nailer assembly and operating instructions (7 pages)
Summary of Contents for Central Pneumatic 96364
Page 1
18-GAUGE AIR BRAD NAILER, OIL-FREE Model 96364 ASSEMBLY AND OPERATION INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed Exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS WORK AREA Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. REV 07h For technical questions, please call 1-800-444-3353. SKU 96364 Page 2...
Page 3
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. For technical questions, please call 1-800-444-3353. SKU 96364 Page 3...
Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, For technical questions, please call 1-800-444-3353. SKU 96364 Page 4...
Place a full clip of the appropriate length (5/8” to 2”) 18-gauge Brads in the Magazine Assembly. Up to 110 Brads can be loaded in the Magazine Assembly. REV 07h For technical questions, please call 1-800-444-3353. SKU 96364 Page 5...
Page 6
The tool should not fire. If the Brad Nailer fails to perform in the manner described above, stop work immediately and have the tool repaired by a qualified service technician. For technical questions, please call 1-800-444-3353. SKU 96364 Page 6...
Press the Driver Guide against a piece of scrap material and test fire the Brad Nailer several times to ensure proper operation. If the Brad Nailer now works properly, continue with the operation, otherwise have the tool repaired by a qualified service technician. For technical questions, please call 1-800-444-3353. SKU 96364 Page 7...
1. Make sure compressor regulator is set between 50-120 PSI. 2. Check all air connections for leaks. 3. Have a qualified service technician clean the interior of the tool and/ or install the head valve piston set. For technical questions, please call 1-800-444-3353. SKU 96364 Page 8...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-800-444-3353. SKU 96364 Page 11...