Emptying The Waste Tray - Xerox 8400B - Phaser Color Solid Ink Printer Reference Manual

Emptying the Waste Tray

Empty the green waste tray (labeled B) when the front panel displays a message stating that
the waste tray is full.
Caution
The printer's interior may be hot. Do not touch the hot surfaces!
1. Open the side door.
2. Pull the green waste tray (labeled B) completely out of the printer.
Caution
The waste tray may be hot; handle it carefully.
Note
The green waste tray may be locked if the printer is in a warm-up cycle or if the ink is
cooling following the
locked, close the door and wait 15 minutes before repeating Steps 1 and 2.
Eliminate Light Stripes
Phaser® 8400 Color Printer
4-23
Maintenance
8400-034
8400-035
troubleshooting routine. If the tray is