Xerox 8400B - Phaser Color Solid Ink Printer Reference Manual page 174

Errors or Warning Messages Description (Continued)
Message
Paper jam-Remove Paper From Tray
1 to Clear
Output tray full - Remove printed
pages to continue.
Tray (2, 3, 4) Empty, Load paper.
Press i.
Load Tray (1, 2, 3, 4 ) with [size/type]
Insert Tray (2, 3, 4). Press i.
Adjust Tray (2, 3, 4) Size. Press i.
Cleaning sheet needed - Load
standard size paper.
Job Requests [size/type]
Replace Maintenance Kit in "x"
pages.
Replace Empty Maintenance Kit.
Press i.
Maintenance Kit Missing. Press i.
Empty Waste Tray. Press i.
Waste Tray Locked. Press i.
Waste Tray Missing. Press i.
Description
1. Remove paper from Tray 1 and load Tray 1 again.
2. Verify that the paper guides are adjusted to fit the
correct paper size.
3. Use only approved paper type, weight, and size. Print
Paper Tips page in
additional information.
The media in the output tray is either jammed or the tray is
filled to capacity. Remove the printed pages to continue.
Load paper in the indicated tray.
Load the indicated paper size and type into the indicated
tray.
Reinstall the indicated tray to continue printing.
The indicated tray is not set to a known size. Adjust the
guides to a known size.
The printer was interrupted while printing a page. To
remove the ink of the partially printed page, the printer
needs a sheet of blank paper. Load letter, A4, or legal-size
paper into the paper tray.
Load the indicated paper size and type into the printer.
(this status message will be duplicated to include each
valid paper size and type combination)
Order new maintenance kit, part number 108R00602
(Standard) or part number 108R00603 (Extended). The
maintenance kit is near the end of its useful life and will
need to be replaced soon.
1. Open side door.
2. Replace orange maintenance kit, labeled A.
3. Order part number 108R00602 (standard) or
108R00603 (extended).
The printer is stopped. Open the side door and insert
orange maintenance kit.
The waste tray is full.
1. Open side door.
2. Empty and reinsert the green waste tray labeled B.
3. Close the side door.
Waste tray is cooling. Close side door and wait 5 minutes.
1. Open side door.
2. Replace green waste tray.
Phaser® 8400 Color Printer
4-33
Front Panel Messages
Troubleshooting menu for