Xerox 8400B - Phaser Color Solid Ink Printer Reference Manual page 182

8. Verify that the green flag in the exit tray is in the raised position. When the green flag is
raised the printhead is locked.
9. Wait for the printer to complete the cool-down period for the ink to solidify. The printer
will shut down when it is cool enough to move.
10. Unplug the printer after the cool-down cycle is complete.
11. Lift the printer by using the hand holds on each side of the printer. Move the printer
separately from the 525-Sheet Feeder.
12.
Repack the printer using the original packing material and box or a Xerox repackaging kit.
Do not ship the orange maintenance kit or green waste tray with the printer.
Caution
Shipping the printer with the maintenance kit and waste tray installed will damage the
printer.
If you do not have all of the original packaging, order the repackaging kit from
www.xerox.com/office/8400supplies. Instructions for repackaging the printer are provided in
the repackaging kit or go to
CD-ROM for additional information. If you are unable to repackage the printer, contact your
local Xerox service representative.
28 kg
60 lbs.
Setup/Other Resources/Instruction Sheets
Phaser® 8400 Color Printer
4-41
Moving and Repacking the Printer
8400-099
on User Documentation