IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual page 80

3. Maintain ribbon tension by turning the ribbon cartridge knob as shown in
Ribbon Shield
Printhead
Figure 25. Ribbon Path around the Printhead
4. Close the ribbon cover.
52
SureMark Printers User's Guide
Figure 24 on page 51. Lower the cartridge into position until the notches on its
sides snap into place on the printer guides. Once the cartridge is in place, turn
the knob until the ribbon slides into place between the printhead and the ribbon
shield. See Figure 25 for correct ribbon positioning.
Correct
August 24, 2004
Not Correct