Select Horizontal Size Of Bar Code; Select Bar Code Height; Select Printing Position Of Human Readable Information (Hri) - IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

ITF
CODABAR
CODE 128C
CODE 93
Reserved

Select horizontal size of bar code

RS-232 Syntax:
where:

Select bar code height

RS-232 Syntax:
where:
Default:

Select printing position of human readable information (HRI)

RS-232 Syntax:
where:
148
SureMark Printers User's Guide
Command = 1D 6B
n = 05
Data = 31 32 33 34 35 36 37 38 39 30 31 32 00 (hex)
Command = 1D 6B
n = 06
Data = 42 39 30 2E 2B 3A 2F 24 2D 43 00 (hex)
Command = 1D 6B
n = 07
Data = 35 34 35 35 35 36 35 37 35 38 35 39 00 (hex)
Command = 1D 6B
n = 08
Data = 31 32 33 34 35 36 00 (hex)
09 - FF
GS w n or X'1D77;n'
n The horizontal magnification of the line width in the bar code, (2 ≤ n
≤ 4).
Default:
n = 03
Note: The last valid value is kept when an invalid value is sent.
GS h n or X'1D68;n'
n The dot height of the bar code, (1 ≤ n ≤ 255).
n = X'A2' (162 decimal)
GS H n or X'1D48;n'
n The print position:
00 Not Printed
01 Above the bar code
02 Below the bar code
03 Both above and below the bar code.
August 24, 2004