Default:
Remarks:
Set or cancel high-quality print mode
This command is supported only for Models TI3, TI4, TI8, TG3, TG4, TF6, and
TM6.
RS-485 Syntax:
RS-232 Syntax:
where:
Default:
Remarks:
Set or cancel unidirectional printing
RS-232 Syntax:
where:
Default:
Remarks:
130
SureMark Printers User's Guide
n = 00
This must be at the beginning of a print-line in the document portrait station.
It is enabled for the entire line.
X'1B;2F;n'
ESC n or X'1B;2F;n'
n=00
Cancel high-quality mode
n=01
Set high-quality mode
n = 00
When high-quality mode is set, the printing will slow down to one-half speed
in the cash receipt station. The slower speed increases the quality of the
printing.
ESC U n or X'1B55;n'
n=00
Cancels unidirectional printing
n=01
Sets unidirectional printing
n = 00
This is valid in the document station in portrait mode only, when there must
be two passes of the printhead to print one print line.
Example: double-high or emphasized print.
When unidirectional mode is set to double-high characters, it takes three
passes of the printhead.
In bidirectional mode, printing double-high characters takes only two passes
of the printhead.
Unidirectional printing takes longer but increases the quality of the print.
August 24, 2004