Description Of Models - IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Suremark printers
Hide thumbs Also See for 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer:
Table of Contents

Advertisement

|
|
|
|
|

Description of models

|
|
|
|
|
|
|
|
4
SureMark Printers User's Guide
v Model TI8 provides a document scanner and a powered flipper, in addition to all
the features of Model TI4.
v Models TF6 and TM6 are single-station thermal printers. They contain no
document insert station. These models cost less, weigh less, and have a smaller
footprint than the thermal/impact SureMark printers. Models TF6 and TM6 have
been designed for wall mounting, if desired by the retailer.
All SureMark printers provide:
v Fast, quiet receipt printing
v Easy paper loading
v 256-KB flash memory for storing messages, logos, code pages, and electronic
journal data
v Model TI8 has 1MB flash memory for scanned image storage
v Bar code generation
v Downloadable fonts and code pages
v Downloadable microcode
v Small footprint
v Support for RS-232 (EIA 232) and RS-485 (EIA 485) interfaces
v Support for Universal Serial Bus (USB) interface
The single-station SureMark printers, the SureMark Model TI8, and also SureMark
Models TI3, TI4, TG3, and TG4 that have been updated with the latest firmware,
support the following in the thermal station:
v Proportional fonts
v Scalable fonts
v Color printing – black plus one accent on two-color thermal paper (thermal
station only)
v Upside-down printing
Additional features of some SureMark models include:
v Single-pass handling of checks (Models TI2, TI4, TI8, and TG4)
v Easy-to-load ribbon cartridge (Models TI1, TI2, TI3, TI4, TI8, TG3 and TG4)
v Epson emulation (Models TF6 and TM6)
v Document scanning (Model TI8)
The SureMark Printers are available in the following models:
Models TI1 and TI3
Standard models that support receipt and document printing. (Model TI1
can no longer be ordered.)
Models T12, TI4
High-function models that feature improved check handling. Check handling
uses the MICR reader and check flipper that are included in these models.
(Model TI2 can no longer be ordered.)
With one insertion of a check into a Model TI2, TI4, TI8 printer, the printer
uses its MICR reader to read the magnetic-ink-character line on the check,
franks the check, and prints the face of the check. While the printer is
processing the check, the operator is free to attend to the customer's
needs, which shortens the total transaction time.
Model TI8
In addition to the features of the Model TI4, the TI8 has a document
scanner feature. Scanned documents can be stored and retrieved in .TIFF,
August 24, 2004

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ti1Ti2Ti3Ti4Ti8Tg3 ... Show all

Table of Contents