IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual page 112

Suremark printers
Hide thumbs Also See for 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer:
Table of Contents

Advertisement

Table 5. Station characteristics
Characteristic
Customer Receipt Station
Speed (see note
TI1/TI2 – 19.6 lps at 6 lpi, 26 lps at 8 lpi;
following table)
TI3/TI4/TI8/TG3/TG4 – 39.2 lps at 6 lpi,
52 lps at 8 lpi;
TF6/TM6 – 39.2 lps at 6 lpi, 52 lps at 8 lpi
|
Paper Width
All models – 80 mm (3.54 in.)
Print Width
For all SureMark printers: 34 characters at 12 cpi,
44 characters at 15 cpi,
48 characters at 17 cpi
For all models except TI1 and TI2:
57 characters at 20 cpi
Pitch
For all SureMark printers: 12, 15, 17 cpi
For all models except TI1 and TI2: 20 cpi
Table 6. Sound characteristics
Type
Description
SureMark
Printer
TI1
84
SureMark Printers User's Guide
Note: In order to conserve power, SureMark Models TI3, TI4, TI8, TG3, TG4, TF6
and TM6 reduce their throughput when printing high print densities, such as
logo messages or full black lines. Because these types of print messages
are used on a limited basis, the overall performance when printing a
customer receipt is not noticeably affected.
The reduced print speed is based on the number of print dots that are turned
on for a given print line, which is defined as dot utilization. Dot utilization is
typically low for normal character printing and up to 100% for full black line
printing. The SureMark printer operates at 52 lps at low dot utilization, and at
slower speeds as the dot utilization increases.
LwAd
Operating
Idling (bels) Operating
(bels)
5.7
N/A
Notes:
LwAd The declared upper limit of the sound power level for a random sample of
machines.
LpAm The mean value of the A-weighted sound pressure levels at the operator
position (if any) for a random sample of machines.
<LpA>m
The mean value of the A-weighted sound pressure levels at the one-meter
(bystander) positions for a random sample of machines.
N/A
Indicates not applicable.
All measurements were made in accordance with ISO 7779 and reported in
conformance with ISO 9296.
Document Insert Station
4.3 lps
37 characters at 12 cpi,
47 characters at 15 cpi,
52 characters at 17 cpi.
12, 15, 17 cpi
LpAm
Idling (dB)
(dB)
61.5
N/A
August 24, 2004
<LpA>m
Operating
Idling (dB)
(dB)
47
N/A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ti1Ti2Ti3Ti4Ti8Tg3 ... Show all

Table of Contents