Proportional Font - IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

August 24, 2004
The number of data bytes per character loaded is 2 × the character height. The
total number of data bytes for this command is 2 × the character height × (1+m−n).
Example: 10 wide × 20 high
Defined as:

Proportional font

This command is supported only for Models TI3, TI4, TI8, TG3, TG4, TF6 and TM6.
RS-232 Syntax:
where:
Purpose:
X'1B26014848 C0C0C0C0C0C0C0C0C0C0C0C0C0C0FFC0FFC0F
C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0C0'
The above statement defines character X'48' as an 'H'.
Note: The number of data bytes = 2 × dot height (20) = 40 bytes.
ESC & s n m data or X'1B;26;s;n;m;data'
s The character set being defined.
1 User-defined thermal code page 1.
3 User-defined thermal code page 3.
n The beginning ASCII address of the characters being defined.
m The ending ASCII address of the characters being defined.
data The height and width of the character, and the matrix pattern for the
data. The number of data bytes is (m−n+1) × (2+wb×32). wb is
defined in the MCT command.
To download and print proportional fonts (True Type fonts) in the thermal
Appendix C. RS-232 programming information
117