Surround - Denon AVR-3300 Operating Instructions Manual

ENGLISH

10 SURROUND

Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment
can be performed with the system setup (see page 23) or from the remote control unit, as described below.
• Adjusting with the remote control unit using the test tones is only possible in the "Auto" mode and only effective in the DOLBY SURROUND
modes. The adjusted levels for the different modes are automatically stored in the memory.
1 Press the T. tone button.
2 Test tones are output from the different speakers. Use the
channel volume adjust buttons to adjust so that the volume of
the test tones is the same for all the speakers.
Test tone signals are not output to the EL and ER channels.
*
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below.
1 Select the speaker whose level you want to adjust.
CH.VOL
(Main unit)
The channel switches as shown below each time the button
is pressed.
FL
1 1
FADER
1
2 Adjust the level of the selected speaker.
SELECT
(Main unit)
The EL and ER channels can only be adjusted when "8CH EXT.
*
IN" is selected.
44
T.TONE
(Remote control unit)
(Remote control unit)
CH SELECT
ENTER
(Remote control unit)
C FR SR SL
1 1 1
SW ER EL
1 1 1
* *
(Remote control unit)
TUNING
BAND
MODE
MEMORY
1,3
USE/LEARN T.TONE
3 After completing the adjustment, press the T. tone button
again.
T.TONE
(Remote control unit)
START LEARNED/TX
SYSTEM CALL
SET CALL OFF
DVD VDP TUNER
1 2
TV/DBS PHONO
4 5
VCR-1 CD MD / TAPE
7 8
VCR-2/V.AUX
+10 0
VOLUME
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
DECK MD
AUDIO CD
AVR/AVC VIDEO DVD
VDP VCR
SYSTEM
TUNING SETUP
TITLE
BAND
MODE
1
MEMORY STATUS
DISPLAY
USE/LEARN T.TONE MULTI
SYSTEM SURROUND
SETUP PARAMETER
TITLE MENU/GUIDE
CH SELECT
ENTER
2
SELECT
STATUS ON SCREEN
DISPLAY RETURN
MULTI OUTPUT DVD
SET UP
2 1
RC-860
POWER
ON / SOURCE
SHIFT
3
6
CHANNEL
9
TV/VCR
A / B
DISC SKIP+
MASTER VOL.
MULTI
MUTING
TV
SURROUND
PARAMETER
MENU/GUIDE
CH SELECT
ENTER
2
SELECT
ON SCREEN
RETURN
OUTPUT DVD
SET UP