Denon AVR-3300 Operating Instructions Manual page 36

ENGLISH
(3) Storing signals
1,5
2
3
1 Press the SET button.
• The START LED and LEARNED/TX LED both flash.
2 Press the button at which you want to store the system call
signals.
• The START LED flashes.
3 Set the mode switch to the position for the component
whose remote control signals you want to store.
AUDIO
AVR/AVC
4 Press the buttons whose remote control signals you want to
store one by one.
5 Press the SET button.
NOTES:
• The remote control signals for the buttons pressed while storing the system call signals are transmitted when the buttons are pressed, so
cover the remote sensor or take other measures so that the components do not operate while the signals are being stored.
• The LEARNED/TX LED does not light if system call signals cannot be stored at the button that you have pressed or if you have already stored
the maximum number of signals.
36
RC-860
START LEARNED/TX
SYSTEM CALL POWER
SET CALL OFF ON / SOURCE
DVD VDP TUNER SHIFT
1 2 3
TV/DBS PHONO
4 5 6
VCR-1 CD MD / TAPE CHANNEL
7 8 9
VCR-2/V.AUX
TV/VCR
+10 0
A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
DECK MD
AUDIO CD MULTI MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND
CH SELECT
ENTER
MODE
SELECT
MEMORY STATUS ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI OUTPUT DVD
SET UP
SET
DECK MD
CD MULTI
DVD
VIDEO
VDP VCR
SET
(4) Clearing system call settings
1 Press the SET button.
2 Press the button whose settings you want to clear.
3 Press the SET button.
• The button is reset to the settings shown on the table on
page 35.
TV
RC-860
START LEARNED/TX
1,3 SYSTEM CALL POWER
SET CALL OFF
ON / SOURCE
DVD VDP TUNER SHIFT
1 2 3
TV/DBS PHONO
2
4 5 6
VCR-1 CD MD / TAPE CHANNEL
7 8 9
VCR-2/V.AUX
TV/VCR
+10 0
A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
DECK MD
AUDIO CD MULTI MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND
CH SELECT
ENTER
MODE
SELECT
MEMORY STATUS ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI OUTPUT DVD
SET UP
SET
SET