Table of Contents
Advertisement
DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1
Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
MONO MOVIE
1
MATRIX
0
2
(Remote control unit)
3
(Remote control unit)
4
(Remote control unit)
NOTES:
• The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.
• When "Default" is selected and the
SIZE" is set to "medium", "EFFECT LEVEL" to "10" and "DELAY TIME" to "30ms".
• The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
ROCK ARENA
JAZZ CLUB
1
1
VIDEO GAME
0
Display the surround parameter screen on the monitor.
The screen for the selected surround mode appears.
*
Set the parameters.
To end the setting mode, press the surround parameter button again.
courser button is pressed, "CINEMA EQ." and "D.COMP." are automatically turned off, "ROOM
ENGLISH
49
Hide quick links:
Advertisement
Table of Contents
