Denon AVR-3300 Operating Instructions Manual page 40

ENGLISH
After starting playback
[1] Adjusting the sound quality (TONE)
The tone control function will not work in the direct mode.
1 The tone switches as follows each time the TONE CONTROL
button is pressed.
TONE
CONTROL
(Main unit)
2 With the name of the volume to be
adjusted selected, turn the SELECT
knob to adjust the level.
• To increase the bass or treble: Turn the control clockwise.
(The bass or treble sound can be increased to up to +12 dB
in steps of 2 dB.)
• To decrease the bass or treble: Turn the control clockwise.
(The bass or treble sound can be decreased to up to –12 dB
in steps of 2 dB.)
[2] Listening over headphones
1 Connect the headphones to the
PHONES jack of the front panel.
2 Press the OUTPUT button to
play the sound
headphones only.
OUTPUT
• The output to the speaker and pre-out jacks is turned off
and no sound is produced from the speakers.
Caution: Switching off the power of the unit and the unit will
*
cancel the settings.
[3] Turning the sound off temporarily (MUTING)
1 Use this to turn off the audio output
temporarily.
Press the MUTING button.
Cancelling MUTING mode.
*
Press the MUTING button again.
40
1
BASS TREBLE
1
(Main unit)
PHONES
1
over the
SYSTEM SURROUND
SETUP PARAMETER
TUNING
TITLE MENU/GUIDE
BAND
CH SELECT
ENTER
MODE
SELECT
STATUS
MEMORY ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI OUTPUT DVD
SET UP
MUTING
(Remote control unit)
NOTE:
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
2
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
DECK MD
AUDIO CD MULTI MUTING 1
AVR/AVC VIDEO DVD TV
VDP VCR