Surround - Denon AVR-2802/982 Operating Instructions Manual

ENGLISH

10 SURROUND

Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment
can be performed with the system setup (see page 22) or from the remote control unit, as described below.
• Adjusting with the remote control unit using the test tones is only possible in the "Auto" mode and only effective in the DOLBY/DTS
SURROUND modes. The adjusted levels for the different modes are automatically stored in the memory.
1 Press the T. TONE button.
2 Test tones are output from the different speakers. Use the
channel volume adjust buttons to adjust so that the volume of
the test tones is the same for all the speakers.
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below.
1 Select the speaker whose level you want to adjust.
CH VOL
(Main unit)
The channel switches as shown below each time the button
is pressed.
FL
2 Adjust the level of the selected speaker.
SELECT
(Main unit)
Only adjustable when the
channel is selected with the
CH VOL buttons on the main
unit.
NOTES:
• The adjustment range for the different channels is +12 dB to
–12 dB.
• When using the DIRECT mode, the sound from the subwoofer
can be cut by lowering the SW (subwoofer) setting one step
from –12 dB (setting it to "OFF").
When the surround back speaker setting is set to "2spkrs" for
"Speaker Configuration", this is set to "SBR", "SBL".
42
T.TONE
(Remote control unit)
(Remote control unit)
CH SELECT
ENTER
(Remote control unit)
C FR SR SB
SW
FADER
(Remote control unit)
3 After completing the adjustment, press the T. TONE button
again.
B
SL
SYSTEM SURROUND
SETUP PARAMETER
TUNING
TITLE MENU/GUIDE
BAND
CH SELECT
ENTER
MODE
2
SELECT
STATUS
MEMORY ON SCREEN
1,3
DISPLAY RETURN
USE/LEARN T.TONE MULTI DVD
SET UP
T.TONE
(Remote control unit)
VOLUME LEVEL
REMOTE SIGNAL
SENSOR
LOCK DIGITAL
INPUT
STAND BY
AUTO DIGITAL PCM
RC-903
START LEARNED/TX
SYSTEM CALL POWER
SET CALL OFF ON / SOURCE
DVD VDP TUNER SHIFT
1 2 3
TV/DBS PHONO
4 5 6
VCR-1 CD CDR / TAPE CHANNEL
7 8 9
VCR-2/V.AUX
TV/VCR
+10 0
A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH / 6CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
TAPE CDR/MD
AUDIO CD MULTI MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND
CH SELECT
ENTER
MODE
2
1 SELECT
MEMORY STATUS ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI DVD
SET UP
2 1