Connecting The Antenna Terminals - Denon AVR-1905 Operating Instructions Manual

Connecting the antenna terminals

DIRECTION OF
BROADCASTING
STATION
FM INDOOR
ANTENNA
(An Accessory)
75 Ω/ohms
COAXIAL
CABLE
AM LOOP
ANTENNA
(An Accessory)
AM loop antenna assembly
Connect to the AM
antenna terminals.
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a
wall.
Installation hole Mount on wall, etc.
FM ANTENNA
An F-type FM antenna cable plug can be connected directly.
3
Bend in the reverse
direction.
AM OUTDOOR
ANTENNA
GROUND
Connection of AM antennas
1. Push the lever. 2. Insert the
conductor.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC which provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
NOTES:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the
AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch metal
parts of the panel.
ENGLISH
3. Return the lever.
11