Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 26).
Example: DVD
FUNCTION
(Main unit)
w Set the input mode to "AUTO" or DTS.
INPUT MODE
(Main unit)
2
Select the STANDARD (Dolby/DTS Surround) mode.
STANDARD
(Main unit)
When performing this operation from the main unit's panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro Logic
SURROUND
MODE
(Main unit)
3
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
SURROUND
BACK
(Main unit)
(Remote control unit)
• Lights when the SURROUND BACK button is on.
4
Play a program source with the
• The Dolby Digital indicator lights when
DIGITAL
Light
playing Dolby Digital sources.
• The DTS indicator lights when playing
Light
DTS sources.
(Remote control unit)
(Remote control unit)
(Remote control unit)
II
x or DTS NEO:6.
SELECT
(Main unit)
SURROUND
BACK
Light
,
mark.
1
1
4
3
3
2
2
2
1
6
8
7
1
ENGLISH
5, 6
2, 7
5, 6
7
3
6
51