Denon AVR-1905 Operating Instructions Manual page 46

Denon av surround receiver operating instructions avr-1905, avr-785
Hide thumbs Also See for AVR-1905:
Table of Contents

Advertisement

ENGLISH
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described)
below.
1
Select the speaker whose level you want
to adjust.
The channel switches as shown below each time the button
is pressed.
FL
When the surround back speaker setting is set to
"1sp" for "Speaker Configuration", this is set to "SB".
"SB" appears only when "POWER AMP ASSIGN" setting
is SURR. BACK mode.
NOTE: Please make sure the "AUDIO" position of the slide
switch on the remote control unit.
2
Adjust the level of the selected
speaker.
Default setting of channel level is 0 dB.
The level of the selected speaker can be adjusted within
the range of +12 to –12 dB using the cursor buttons.
SW channel level can be turned off by decreasing one step
from –12 dB.
OFF ´ –12 dB ´ +12 dB
46
C
FR
SR
SBR
SW
SL
SBL
2
2
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-785sAvr-785Avr-19/78505

Table of Contents