Denon AVR-1905 Operating Instructions Manual page 30

ENGLISH
Auto Tuner Presets
Use this to automatically search for FM broadcasts and store up to 56 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8, E1 to 8, F1
to 8 and G1 to 8.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it
using the manual "Preset memory" operation.
1
2
After setting up the system
1
This completes the system setup operations. Once the system is set up, there is no need to make the settings again unless other components
or speakers are connected to or the speaker layout is changed.
• On-screen display signals
Signals input to the AVR-1905/785
VIDEO signal input jack
(yellow)
1 E
2 C
3 E
4 C
(C: Signal E: No signal)
NOTE:
• When a component video signal is input and when the "Video Input Mode" is set to the component fixed mode at Input setup, the on-
screen display is only displayed when the System Setup, Surround Parameters and On Screen buttons are operated.
30
Use the CURSOR button to select "Yes".
"Search" flashes on the screen and searching begins.
"Completed" appears once searching is completed.
The display automatically switches to screen.
29 PRESET <YES
Press the ENTER or
Press the SYSTEM SETUP button to finish system set up.
Video signal output to VIDEO
S-video signal input jack
MONITOR OUT jack (yellow)
E
E
C
C
(C: On-screen signals output
(down) button if you want to start the settings over from the beginning.
On-screen display signal output
Video signal output to S-
Video MONITOR OUT jack
C C
C C
C C
E C
E: On-screen signals not output)
Video signal output to Color Difference
(Component) Video MONITOR OUT jack
C
C
C
C