Units—"Turning" Group; Roughing" Group; Finishing" Group - HEIDENHAIN MANUALPLUS 620 User Manual

6.1 Units—"Turning" Group

"Roughing" group

Unit
G810_ICP
G820_ICP
G830_ICP
G835_ICP
G810_G80
G820_G80

"Finishing" group

Unit
G890_ICP
G890_G80_L
G890_G80_P
G85x_DIN_E_F_G
436
Description
G810 Longitudinal in ICP
Roughing an ICP contour longitudinally
G820 Transverse in ICP
Roughing an ICP contour transversely
G830 Contour parallel in ICP
Roughing parallel to the contour in ICP
G835 Bidirectional in ICP
Roughing an ICP contour in two directions
G810 Longitudinal, direct
Longitudinal roughing with direct contour input
G820 Transverse, direct
Transverse roughing with direct contour input
Description
G890 Contouring in ICP
Finishing an ICP contour
G890 Contouring, direct longitdnl.
Longitudinal finishing with direct contour input
G890 Contouring, direct transverse
Transverse finishing with direct contour input
G890 Relief, type E, F, DIN76
Finishing the undercuts according to DIN509 type E and F and the thread
undercut DIN76
Page
Page 52
Page 53
Page 54
Page 55
Page 56
Page 57
Page
Page 96
Page 98
Page 99
Page 100
Overview of Units